Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dialing on a Specific Trunk Channel/Port
- Thread starter wokdabat
- Start date
mikeydidit
IS-IT--Management
thread690-790614
As it was in the above thread, it isn't allowed with PRI service. This could be done on copper or CO trunks by the TAC or a verify button.
Mikey
As it was in the above thread, it isn't allowed with PRI service. This could be done on copper or CO trunks by the TAC or a verify button.
Mikey
mikeydidit
IS-IT--Management
Playing with this a little more, it will allow you to use the verify button If their is a call in place on that specific trunk.
Example
verify button
TAC member number (thats in use)
Will bridge that call. If the trunk is idle you get the turkey tone.
Mikey
Example
verify button
TAC member number (thats in use)
Will bridge that call. If the trunk is idle you get the turkey tone.
Mikey
- Status
Similar threads
- Locked
- Question