fathead
IS-IT--Management
- Apr 13, 2002
- 154
I need some help with remote connection to Redhat 8 server via modem. What files do I need to edit and what is the correct syntax for the inittab? I am using a Multitech 2834zdxb.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dial into Redhat 8 server
- Thread starter fathead
- Start date
- Status
Your remote connection to RH 8 through serial or tcp/ip protocol ?
You set the modem auto answer.You just use hyperterminal/minicom from remote site dial to your RH 8.
Sure, you should use atdt no.phone or 9,no.phone through PABX
This is through serial to serial connection without tcp/ip protocol.
Good Luck...
You set the modem auto answer.You just use hyperterminal/minicom from remote site dial to your RH 8.
Sure, you should use atdt no.phone or 9,no.phone through PABX
This is through serial to serial connection without tcp/ip protocol.
Good Luck...
- Status