Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dial 9

Status
Not open for further replies.
CarrierTech

CarrierTech

Technical User
Joined
Apr 15, 2014
Messages
29
Location
US
I want to change the trunk group calls go out on when a user dials "9". Where do I do that?
 
Sort by date Sort by votes
If you are using BARS then that access code is AC1 in LD 86. If you are actually using 9 as a trunk group access then you do that in the route in ld 16. If you go into LD 22 and do a DNB on 9 it will tell you what it is.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

VRRyan
  • Locked
  • Question Question
Dial 9 for outbound
Replies
8
Views
733
VRRyan
VRRyan
Option11PLM
  • Locked
  • Question Question
MGXPEC - NT8D09 cards are working but phones do not appear to be powered up & no tones (dial, ringing, etc.)
Replies
2
Views
568
dianvaguar
dianvaguar
phonetech2012
  • Locked
  • Question Question
988 suicide line
Replies
6
Views
905
bignose21
bignose21
techdgrubbs
  • Locked
  • Question Question
Allow fire panel to dial out that cannot dial 9 on pbx
Replies
9
Views
766
StanleySteamer
StanleySteamer
BuffaloBilly
  • Locked
  • Question Question
Administer Call Pilot via Dial Up Networking
Replies
4
Views
373
BuffaloBilly
BuffaloBilly

Part and Inventory Search

Sponsor

Back
Top