hi guys,
here I go again with another stupis question...
I need to reconfigure a LAN with 3k computers on the same subnet to minimize colisions and the contractor do not want spend money on this task.
I have two D-link switches model DES 3326SR that are RFC 1542 compliant and I want to set many V-LANs as possible to do that.
here is my problem: All computers on the network are set to fixed IP, and I want to set to dinamic using a DHCP server.
my doubt is: in each subnet a different gateway will be set. the DHCP server will assing the corect scope to that subnet with no relay agent? if it is not, how can I do this without spend any money?
again, thanks for your patience to my stupis questions and poor english.
Rodrigo Ferreira MCP
MCSE wannabe
here I go again with another stupis question...
I need to reconfigure a LAN with 3k computers on the same subnet to minimize colisions and the contractor do not want spend money on this task.
I have two D-link switches model DES 3326SR that are RFC 1542 compliant and I want to set many V-LANs as possible to do that.
here is my problem: All computers on the network are set to fixed IP, and I want to set to dinamic using a DHCP server.
my doubt is: in each subnet a different gateway will be set. the DHCP server will assing the corect scope to that subnet with no relay agent? if it is not, how can I do this without spend any money?
again, thanks for your patience to my stupis questions and poor english.
Rodrigo Ferreira MCP
MCSE wannabe