Dgtl set DROL time out 1

[phones1]

I cant remember, wot is the DROL change that stops DGTL ports disabling when there isnt a set plugged in after the switch does its midnights.

Thanks

;-)

Remember if it doesn't work hit it harder

Scott UK

 

[PERRYPJ]

Take LD 30 out of the DROL, but I wouldn't do it unless it's a OPT 11 or 51C

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[phones1]

thanks, been doing IP for tooo long starting to forget the old stuff, cheers dude ;-)

Remember if it doesn't work hit it harder

Scott UK

 

[phonejack99]

The proper way to do this is CLS = FLXA.

This will stop digital TN's from disabling during the DROLs.

In my opinion removing LD 30 from DROl's is not only wrong, but poor craftmanship.

Take pride in your work an do it right the first time!!!!

 

[GHTROUT]

There are some good reasons one might want to pull 30 from DROL for a period of time. The best is when you are going through a multi-day relocation or construction project. But, leaving it in is the best choice on an ongoing basis.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators