Definity-Cisco7200

[davisdev]

Hi,guys!

I´m looking for some information about connecting a Definity Prologix V6 to Cisco 7200, we are trying connecting them trough a ds1 card with E1 CAS, but some problems betwen them not allow the correct communication. We tried the information that is in the cisco web page but not working, so if any of you have any experienced connecting these equipments will be very appreciatted.

Thx.

David

 

[98Converter]

You need to make sure your cabling is pinned-out correctly. I had to make a custom cable. It also depends on your signaling...

Thanks,
Chris

 

[davisdev]

Hi Chris.

can you give me a little more information about that?

Thx