richard1458
Instructor
Several reports which have previously printed without problem are suddenly coming out very large, as if the scaling or font had suddenly been set to 400% of its previous value. The problem seems to occur when I print a report using the Toolbar 'Print' button, as opposed to File/Print on the menu. It also seems to occur - sometimes - for reports which are printed using DoCmd.OpenReport stDocName acNormal (also tried acViewNormal)
I had temporarily set the paper size to something quite small (6"x4"
for another print job, and assumed this was the cause, but the problem persisted after resetting the default paper size and restarting Access
(I have Access 97, Windows 98, and an Epson Stylus Photo 750 printer, if that helps).
Any suggestions...
- Richard
I had temporarily set the paper size to something quite small (6"x4"
for another print job, and assumed this was the cause, but the problem persisted after resetting the default paper size and restarting Access(I have Access 97, Windows 98, and an Epson Stylus Photo 750 printer, if that helps).
Any suggestions...
- Richard