DECT R4 SNMP MIBs

[derfloh]

Hey together,

I played around with SNMP traps but had no usable results for DECT R4 base stations. I almost only get messages about unknown events.

I'm not wondering about that because I have no MIB files. So I can see only plain OIDs.

Does anyone know where to get MIBs? I searched at Avaya as well as Ascom but wasn't able to find anything.

 

[mattKnight]

I asked a similar question to Avaya. Their response was along the lines of 'the information in the mibs is only for engineering diagnostic use'

Pretty daft

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[derfloh]

That's really stupid... If that was the case they should hide the diagnostics area as well.

 

[intrigrant]

great, they mention the SNMP mibs in the product info as a system feature and when asked they say it is only for engineering diagnostic.

What do they think, we are endusers here?

 

[janni78]

If you download the latest version 7.1.4 the MIB is included in the zipfile.

ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/DECT_R4_July_2014/IPBx_v7_1_4/IPBS1_v7_1_4.zip
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/DECT_R4_July_2014/IPBx_v7_1_4/IPBS2_v7_1_4.zip

"Trying is the first step to failure..." - Homer

 

[janni78]

Saw that in IPO 9.1GA a newer version is used (7.2.7) but no MIBs there =|

"Trying is the first step to failure..." - Homer

 

[derfloh]

Really? I will have a look at 7.1 MIBs though. Perhaps they didn't change from 7.1 to 7.2... But perhaps the IPO Resiliency options were added in R7.2 than these parts will miss...