Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dealing with Junk Faxes

Status
Not open for further replies.

paulhung

Technical User
Feb 2, 2001
37
US
Hi everyone,

Not sure where to post this question, but since I am running on IP Office, I'd try here.

We have a couple of fax machines running from the POTS lines that have been receiving an annoying amount of junk faxes. I was wondering if anyone has had any success in reducing the number of faxes in, whether by software or through an in-line device.

Thanks,

Paul
 
if you have the numbers of the sending companys then you can route those numbers
for every number you make an incoming call route and virtual user and set that user to do not disturb
turn voicemail of for that user
it should disconnect the call
with voicemail pro you can even do more with it



______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Or get a fax server to then only print the ones you want

Jamie Green

IPO ACA:Implement


Fooball is not a matter of life and death-It is far more important!!!!
 
Paul if you are based in the UK you can register your fax numbers with an agency that 'cold faxers' (so to say) have to check against before being able to send faxes to you. I have done this on 5 fax machines we have in our offices and seems to have solved the problem. The url is and best of all it's Free!
 
Better yet is to track the incoming ID and create routes with destination of an extension that doesn't exist or a short code that uses feature busy. My favorite is to route the call back to the sender but that does take an extra trunk but has a dramatic effect on the senders psyche. Imagine sending an unwanted call center call back to the originator!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top