DCS and VoFR 1

[VoiceGuy69]

Has anybody had any experience (or luck) doing DCS with VoIP or VoFR?  I am currently trying to convert an exsisting DCS+ link to work over vofr and am having trouble getting the d-channel to come up.

 

[cclausen]

Make sure the frad device is not playing with channel 24. It can't do anything to the D channel or it won't work. Also what type of PRI did you program in the Definity. A, B?

Chris

 

[telecomfred]

have two definitys which were dcs T1 PRI now relocated in same building (10ft apart). having problem directly connecting the two.not sure what data to change or type of connection i.e 25pr or fiber..

 

[telecomfred]

have two definitys which were dcs T1 PRI now relocated in same building (10ft apart). having problem directly connecting the two.not sure what data to change or type of connection i.e 25pr or fiber..

 

[Guest_imported]

I have had dcs+ working with both voip and vofr. getting the d channel to come up initially was a bit tricky. what point are you up to now?
dlittlewood@totalise.co.uk

 

[telecomfred]

I am ready to cha tr grp but not sure of tr type field or comm type field: also have question about connectivity between the two switches? do I use existing 767e ds1 ? what type of cabling?