DC running on Win2k Server having problems after sp4 install

[Peach66]

I happen to be experiencing a problem with my domain controller that is also a DNS and DHCP server after I installed SP4...HHmmm

My server is rebooting and now has been needing me to press F1 to boot during startup. Anyone can tell me how to remove that and how did it suddenly appear?

 

[yizhar]

HI.

The press F1 message at boot is normally related to the BIOS and other hardware devices because it is before OS load.

Try to upgrade the BIOS and also to clear CMOS settings (BIOS SETUP ==> load defaults)

Are you sure that the problem is related to SP4 - maybe it was before but you haven't notice it?

Take a look here, maybe you'll find something similar:
Windows 2000 SP4 Anecdotal Problems:

http://www.w2knews.com/anecdotes.htm

Yizhar Hurwitz

http://teachers.sivan.co.il/yizhar