Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Date And Time Throught The Phone

Status
Not open for further replies.

jamie77

Programmer
Oct 15, 2004
4,523
GB
I know you are all going to say RTFM, but....

I am trying to find how to change the way to set the IPO time though a handset. I have been searching around the docs. I have found that you set an admin button on the phone but I have a customer on 4.0 that did it without needing this button. I am too proud to ring a customer and ask him how he does it so here I am!!!



Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

Football is not a matter of life and death-It is far more important!!!!
 
:-(

Can't find the Short Code to do this without a button!

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

Football is not a matter of life and death-It is far more important!!!!
 
From 4.0.7


3.3 System Phone Date and Time Change
DS 5410/5420 and IP 5610/5620 telephones programmed to ‘System Phone’ now have the ability to change the date and time of the IP Office. To enable this feature, the system phone must dial *9000* then press the ‘hold’ button after hearing the confirmation beep. The display will now show Date and Time. The date can be entered by Day/Month/Year (16/05/2007) or Month/Day/Year (05/16/2007) dependant on system Locale.
E.g. enter date 16/05/2007 press 1, 6, #, 0, 5, #, 2,0,0,7 from the System Phone.
E.g. enter time 14:05 press 1, 4, #, 0, 5 from the System Phone.

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Manually Setting the System Time

For IP Office systems without access to a time server, a number of methods to manually set the system time exist. These are available in the IP Office 4.1+. The following method is only supported on these phones: 2410, 2420, 4412, 4424, 4612, 4624, 4610, 4620, 4621, 5410, 5420, 5610, 5620, 5621, 6412, 6424. It is supported on any analog, T3, T3 IP or wireless (IP DECT, 3600, 3700 Series) phones.

• Note: If the IP Office system that is still configured for automatic time updates (on by default), any manually set time and date will be overridden on the next automatic update. The use of automatic updates can be disabled by setting the System | System | Time Server IP Address to 0.0.0.1.



Enabling a User Button for Time and Date

1. Select the user who can adjust the system time and date.

• If necessary create a new user who can be used to log in and set the time and date before logging out.

2. On the User | Telephony tab, ensure that the option System Phone is selected.

3. On the User | Button Programming tab select and double-click on an available button.

4. Select Emulation > Self-Administer as the action.

5. In the Action Data field enter 2.

6. Enter an appropriate label for the button.

7. Adding another button set to the Emulation > Time of Day action is recommended as this will allow the user to view and confirm the systems current time.

8. Send the updated configuration to the IP Office.



Using the Programmable Button

1. Press the programmed button. If the user has a Login Code set it is requested.

2. The options Date and Time are displayed.

3. To set the date press Date.

1. The current system date is displayed.

2. Enter the new date, using two digits for day and month. Use the * or # keys to insert the / separators. The format for date enter matches the locale of the IP Office system.

3. During entry the key labeled <<< can be used to backspace.

4. When the full date has been entered as required, press Next.

5. Press Done.

6. The phone will return to idle.

4. To set the time press Time.

1. The current system time is displayed.

2. Enter the new time using 24-hour clock format. Use the * or # keys to insert the : separator.

3. When the full time has been entered as required, press Done.

4. The phone will return to idle.




+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++
 
@ Ekster, true but not on 4.0


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Oi Jamie

RTFM!

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
I suppose the replies should be RTFTB rather than RTFM!!!!

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

Football is not a matter of life and death-It is far more important!!!!
 
Very true :)

I can not remember wich one sometimes because there were too many changes in maintenance releases in 4.x


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top