Datagrid Refreshing

[meny21]

Hello Guys,

I'm new working with datagrid, and I'm using it with a DataEnvironment including DataSource and DataMember Properties. It is working OK, just when I press my Save button my Datagrid is not refreshing the data, Just presenting the same data, but the data is stored there...

what do you recommend me?

Thanks

MR

 

[yoavbs]

Try first closing the recordsourse and the connection to the db, and only after doing that, refresh the adodc or the datagrid that you are using

 

[johnwm]

meny21
First of all read faq222-2244, which shows you how the forum works. I see you have asked 35 questions but haven't yet got any answers that have been valuable to you. Have a look at paras 8(basic research), 13 & 14 (specify the problem clearly and show the code), 15 (acknowledge answers) and 16 (put something back)

Then clarify your question and you may get more answers

________________________________________________________________
If you want to get the best response to a question, please check out FAQ222-2244 first.
'If we're supposed to work in Hex, why have we only got A fingers?'
Drive a Steam Roller