Cut Cords

[jml2665]

Anyone know where I can purchase cut-cords? RJ-11 or RJ45 ended, solid wire, open ended or connectors of both ends,

for use as modular to 110 or 66 cross-connect field.

I have been searching forever for these and since they are older connectors no one seems to carry them or at least they no longer show them in their online catalogs

 

[dphoneguy24]

I purchase these through Anixter - they get them from a company in Missouri - 25 foot long solid conductor straight thru wiring with RJ11/RJ11 on both ends - we cut them in half to jumper out to 66 or 110 blocks from Partner ACS or IPO systems. They also have the RJ45/RJ45 25foot long.
Hope that helps.

dphoneguy24

 

[jml2665]

would you happen to have the anixter part number? you describe exactly what I need but in the catalog they have many cables that fit that description

 

[IPhello]

The part number for these are m32ambagy, and you can describe them to Anixter as a 2pr rj11/11 cat 3 2 pr SD PVC USOC 25'. The RJ45's are M34AMPAGY, and you can decribe them as a 25' CAT 3, RJ45-RJ45 JUMPER CORD. I'm pretty sure these are Anixter part numbers. I get my cables from the same vendor as dphoneguy24

 

[jml2665]

Thanks both of you, when I was with avaya we just walked into the piggly wiggly and there were always there, never thought to get the part numbers or labels when I was layed off

 

[aarenot]

Have you satifactorily rack-mounted 5-slot carrier?"

This is another thread which I responded to above in quotes, quick cables from this web site should provide various 25 to 50 pair cables that are broken out to RJ's

They have whips for partner equipment, merlin, etc. There is a cable with 24 RJ11's on single pairs that works great for IPO. The 24 RJ11 cable is for another system, but it all works the same if it has the pin out you want. You can also get them with amphenol ends if you want, I believe.

http://www.expcomm.com/quickcables/lucentattavaya.asp