Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cursor Jumping

Status
Not open for further replies.
hycha

hycha

Technical User
Joined
May 30, 2001
Messages
1
Location
CA
When I am in one of my AutoCad Files the cursor jumps from place to place. The Osnap is no on and the system I am using is a pIII 800. 256 megs ram. The file is 10 or so megs and this problem doesn't occur in any other large file. Can someone help me???
 
Sort by date Sort by votes
You may try running an audit on the file, and let Autocad fix any errors it finds. I have seen this happen in drawings before , and it seemed to help the problem.



hth
Rob
 
Upvote 0 Downvote
Perhaps the video card is updating the display change.
 
Upvote 0 Downvote
just try a different display setting,
(Control Panel > Display, Settings Tab, and desktop area.)
See if that makes a difference, if so then it is obviously
a display problem and not the dwg. Jay~

"I'll moider da bum."
- Heavyweight boxer Tony Galento, when asked what he thought of William Shakespeare.

~KeyTech
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top