CS1000E and MRV terminal server

[dlesap]

Hi

To get a serial port for CDR on CS1000E, Nortel provide a terminal server box MRV. Programming that box to autoconnect on CS1000E Rlogin port, it distribute a serial port for CDR purpose outside the MRV through a PTY.

That is working, but... the first time the MRV box start or after a restart of that box, the serial port comes in the pdt. It's then necessary to enter pdt pwd and then sl1input.

Does anyone knows how to start a script in the MRV box to auto entering in the PBX ?

Experience welcome...

 

[johnpoole]

any script can be auto exec when tied to a connection directory. not a cure but i don't know that box. if your connecting to via procomm you can auto fire a script. if your not that good at aspect, (like me) just go to script recorder and record the key sequence, then tie it to the connection dir

john poole
bellsouth business
columbia,sc

 

[Reusser]

Have you followed these steps from NTPS?

Configuring a transparent rlogin port with sample data
Sample data has been incorporated into Procedure 61. This configuration
shows that a device connected to MRV Port 2 will rlogin 47.11.166.76
through pty 10.
Procedure 61
Configuring a transparent rlogin port
1 Enable keepalive timer 1 for the port. Enter the command:
DEFINE PORT 2 IP TCP KEEPALIVE TIMER 1
Connecting a Terminal Server Page 265 of 476
Communication Server 1000E Installation and Configuration
2 Enable a dedicated service using rlogin. Enter the command:
DEFINE PORT 2 RLOGIN DEDICATED SERVICE 47.11.166.76
3 Enable the port to be accessible only by local command and from a serial
connection only. Enter the command:
DEFINE PORT 2 ACCESS LOCAL
4 Enable the In-Reach Element Manager to complete a ZMODEM transfer
using the rlogin feature. Enter the command:
DEFINE PORT 2 RLOGIN TRANSPARENT MODE ENABLED
5 Enable autoconnect for the port. Enter the command:
DEFINE PORT 2 AUTOCONNECT ENABLED
6 Enable autodedicate for the port. Enter the command:
DEFINE PORT 2 AUTODEDICATED ENABLED
7 Define a user name for the port. Enter the command:
DEFINE PORT 2 USERNAME PTY10
8 Log out of the port. Enter the command:
LOGOUT PORT 2
End of Procedure

 

[dlesap]

Reusser,

Yes i follow that configuration, and the screen is displaying the pdt pwd to be entered. I think that the normal way, cause Rlogin session without additionnal command "-l CPSID1000" will arrive in pdt.

I guess it's possible to do it with a MRV script. but i don't know how it works.

John, on that serial port i will only have a buffer box that is unable to sript anything.

 

[dlesap]

Additionnaly, if i can enter CPSID1000 or CPSID1111 i will never have the CDR tickets on that port, regarding 0 and 1 (SCH, MTC, BUG and TRF)

I set up the PTY port with CDR but i need to be sure the MRV box is the first one to be connected on CS. When creating more than 1 PTY, the 1st Rlogin session is automatically connecting on the higher PTY port number.