Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CS1000
- Thread starter coniglio
- Start date
I don't think you can power the system down remotely. You can initialize and sys it. You have a manual powerswitch on the powersupply, and the best thing to would be to manually power off the system and take out the power cord. In that way you're atleast sure that high voltage, peaks, shortconnections destroys the powersupply.
i2007
i2007
- Thread starter
- #3
Be sure that you have a valid and good backup. As stated in another post, make sure you have at least 2 of them. If you use ld143 and xbk to download a backup, make sure you use the xvr command to remote verify the database if the system not will come back up again by itself.
i2007
i2007
- Status
Similar threads
- Question
