CS1000 Call log 1

[njphones]

Can anyone tell me how to turn on the call log feature to log incoming calls to each extension? We have a CS1000 with PRI, caller id and a mix of IP and digital phones.
We have telephony manager but we also have the command prompt for programming.

 

[Reusser]

If it is for a 3900 type set it is done at the phone. (options key - scroll to Call Log - select option)

If for a IP phone - needs to be activated on Signalling server - limit to 1000 users unles you have a dedicaed server.

Go to Element Manager on the Signaling Server
Choose IP Telephony
Choose Personal Directories
Under the Server IP Address field, enter the IP address of the *ELAN*

Click Submit

 

[Altayan]

Is this particular to a certain release or reliant on something like "IP Line"? I have been in several places on my sig server and just don't see it. Thanks.

 

[njphones]

Thanks!

 

[Reusser]

I think Call Log for IP phones was introduced with 4.5 or maybe 4.0

There are additional changed for 5.5

 

[gwebster]

Configuration & maintenance of the IP Phone variation is described in the "IP Line Fundamentals" NTP under "Personal Directory, Callers List, and Redial List".

 

[Altayan]

I have IP Line 3.1 running on my rls 3 cs1000. Pretty sure I am just out of luck on getting it going without the higher ups doing an upgrade. Thanks for the info guys.

 

[dabble]

Is it possible to view the callers list on an 1140e set, on Release 4.5? I am looking in the NTP's and so far I have seen that it is possible only with an Application Server.

Anyone know why they would take away a feature such as this?

 

[gwebster]

The "Application Server" which you are referring to is a software which runs on the "Signaling Server".