Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Crossover cabeling request... 2
- Thread starter vincebus
- Start date
Sure it is simple:<br>
<br>
On Connector ¦ On Connector<br>
One: ¦ Two:<br>
Pin 1 ----------- Pin 3<br>
Pin 2 ----------- Pin 6<br>
Pin 3 ----------- Pin 1<br>
Pin 4 ----------- OPEN <br>
Pin 5 ----------- OPEN<br>
Pin 6 ----------- Pin 2<br>
Pin 7 ----------- OPEN<br>
Pin 8 ----------- OPEN<br>
<br>
It is easy to understand because if you were to draw it out on a diagram, you would see the cables cross. 1 to 3, 2 to 6, 3 to 1, and 6 to 2. Leave all the rest open.<br>
<br>
<br>
<br>
<br>
On Connector ¦ On Connector<br>
One: ¦ Two:<br>
Pin 1 ----------- Pin 3<br>
Pin 2 ----------- Pin 6<br>
Pin 3 ----------- Pin 1<br>
Pin 4 ----------- OPEN <br>
Pin 5 ----------- OPEN<br>
Pin 6 ----------- Pin 2<br>
Pin 7 ----------- OPEN<br>
Pin 8 ----------- OPEN<br>
<br>
It is easy to understand because if you were to draw it out on a diagram, you would see the cables cross. 1 to 3, 2 to 6, 3 to 1, and 6 to 2. Leave all the rest open.<br>
<br>
<br>
<br>
-
2
- #3
Here is a url for a crossover cable to do 100mbs full duplex:<br>
<br>
<br>
- Status
Similar threads
- Locked
- Question