wangui1981
IS-IT--Management
I have installed pervasive 9.5 client on workstation.When i try to create an ODBC DSN so that i run ACCPAC 5.4 i can't get a list of the DSN to select the particuluar DSN.Where am I going wrong.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CREATING ODBC DSN
- Thread starter wangui1981
- Start date
- Status
- Thread starter
- #3
wangui1981
IS-IT--Management
Thanks for the reply.I have tried to use the ip address instead of the server name still doesn't help. if i run from the local machine using the server name or server ip address am able to see the files.What else could be wrong.
Jay Converse
Programmer
I don't know, this is pretty basic stuff.
1. ODBC
2. System DSN
3. Add
4. Select Pervasive Client
5. Enter DSN Name
6. Enter Server Address
7. Press Get DSN List
If you don't see the DSN's at this point, then your server name is wrong, or you have something blocking communications.
1. ODBC
2. System DSN
3. Add
4. Select Pervasive Client
5. Enter DSN Name
6. Enter Server Address
7. Press Get DSN List
If you don't see the DSN's at this point, then your server name is wrong, or you have something blocking communications.
- Status
Similar threads
- Locked
- Question