Create new virtual superloop for IP phones

[andyt16]

This has been dumped on me and while I have basic knowledge of the system this is way beyond what I know. I've just had 50 new IP licences applied to the system and need to setup the TN's for them. The last IP TN at the moment is 108 0 01 31 so I would want them to start from 108 0 02 00 so they are continuous.

I'm happy to go into the terminal and provide info if needed but basically just need pointed in the right direction in regards to the above.

Any help would be appreciated!

 

[bhassell2000]

do you get an error when you try to build a set on 108 0 02 00?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/pub/buddy-hassell/7/5a5/b8b

 

[andyt16]

Yeah, that the TN didn't exist...

I've managed to create the 108 0 02 and 108 0 03 ranges using the web interface now which has allowed me access to mey new licenses but am still curious how to add the virtual cards from the terminal.

 

[bigindian65]

you have v108, which is 108 0 0 thru 108 0 15

to create a superloop you go to ld 97 and do new supl

if you entered v112

you would have new virtual loop 112 0 0 0-31 thru
112 0 15 0-31



Mato' Was'aka

 

[DFKSydney]

If you run out of TNs in the 108 0 XX YY group, why not just use 108 1 XX YY?????

 

[andyt16]

I have created the virtual octal-density cards on the web interface and can create IP devices using the new TN's on those cards but when doing a LUVU through LD 20 I only see the 7 TN's that I had previously left?