Sep 22, 2005 #1 towser Programmer Feb 19, 2001 29 GB Is it possible to somehow enable a simple VB exe to be run as a Service on a remote computer?
Sep 22, 2005 #2 MatDavies Programmer Feb 22, 2001 243 GB There are a couple of ways. I should point out that Microsoft activly discourage it though. http://www.smsoft.ru/en/ntservice.htm this is a very good way to do it, I have used this and it works nicley. http://www.vbwire.com/advanced/howto/service2.asp This is the microsoft way, it involves an ocx. regards Matt If you can keep your head while those around you are losing theirs, you obviously haven't grasped the seriousness of the situation Upvote 0 Downvote
There are a couple of ways. I should point out that Microsoft activly discourage it though. http://www.smsoft.ru/en/ntservice.htm this is a very good way to do it, I have used this and it works nicley. http://www.vbwire.com/advanced/howto/service2.asp This is the microsoft way, it involves an ocx. regards Matt If you can keep your head while those around you are losing theirs, you obviously haven't grasped the seriousness of the situation
Sep 22, 2005 #3 chiph Programmer Jun 9, 1999 9,878 US You might want to do a search in this forum (click the button above), as this topic has been covered in depth several times before. Chip H. ____________________________________________________________________ Donate to Katrina relief: http://s1.amazon.com/paypage/PELYGQVJ8Q7IB/103-6821258-5919825If you want to get the best response to a question, please read FAQ222-2244 first Upvote 0 Downvote
You might want to do a search in this forum (click the button above), as this topic has been covered in depth several times before. Chip H. ____________________________________________________________________ Donate to Katrina relief: http://s1.amazon.com/paypage/PELYGQVJ8Q7IB/103-6821258-5919825If you want to get the best response to a question, please read FAQ222-2244 first