CR7 upgraded to CR11 problem

[paulmtl]

Hi all,

I upgraded myreportcr7.rpt to become myreportcr11.rpt and seemed to have a problem about OLE with Visual Foxpro 5.0 ?

Can someone helps me to explain what went wrong because I am
new to both CR7 & CR11 ?

But when I run myportcr11.rpt directly without VFP5.0 interface with OLE objects is worked fine sometimes.

TIA.
Paul

 

[synapsevampire]

Not much to go on there.

Perhaps you could share what ISN'T working, rather than worked fine sometimes.

If you're embedding a report within VFP, and you did not use the RDC in VFP, then you might want to do a rewrite to take advantage of the RDC.

Here's an export example using the RDC for VFP:

http://support.businessobjects.com/communityCS/FilesAndUpdates/scr8_vfp_rdc_export.exe.asp

-k