CP100/150 Off Premise Message Notification

[wip]

Is there a way to turn of the message one gets on the Notification to Press 1 to login or press 2 if this is notification is not the called party?

Any suggestions would be helpful.

Thank you,

Wip

 

[tnphoneman]

Not when calling a phone.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[wip]

Then tell me this what exactly is the reason behind this Press 1 to login and Press 2 in this is not you......

Never had to do this before CallPilot?

--wip

 

[CTCINY]

If you press 2 it removes that phone number from the off premise notification list so calls dont continually go to that number

What doesn't kill you only makes you stronger.

 

[curlycord]

Is the user setup as CP mode or Norstar mode?

 

[wip]

When you say CP Mode or Norstar Mode?

Is this what you mean below? Or can I find it somewhere else in order to turn that off when calling my telephone each time with a message? I set it up, now why would it be calling someone else tnphoneman and CTCINY....I know that it kicks me out, I just want to turn it completely...OFF and press anykey.

Enable Callpilot User Interface is checked

Primary UI Style - NVM

--Work in progress

 

[curlycord]

On an Option 11 (PBX) it is like Call Pilot mode and you will get that prompt to press 1 or 2.
In Norstar (NVM) mode it will just ask you to enter your password.

CP mode was designed to migrate users that came from an Option 11 to a smaller site on a Norstar and not have to retrain them so you would select CP as the user.

Tye NVM on one mailbox and test it.