Have a cp100 rls2.1 MICS 6.1 I can build all mbxs except 230 about half way through it says can't continue and drops out. everything else works fine. I think I will reboot the CP. Any thoughts??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CP Won't build mbx??
- Thread starter silver987
- Start date
telaphoneguy
Programmer
How many mail boxes does is your CP100 equipped with?, You might be out of mail boxes.
- Thread starter
- #4
TheMitelGuy
IS-IT--Management
How are you adding it, via the phone or IP?
- Thread starter
- #7
Either way, IP it looks like it built it but it dosent show up, through the phone it quits about half way through, says can't continue. That station is the only one I can't build. Strange??
gecko202002
Technical User
Is the mailbox a 11X or a 19X? If they are, then it is conflicting with the special prefixes that are designated in Call Pilot.
- Thread starter
- #9
- Status
Similar threads
- Locked
- Question
