DoctorDia1tone
Vendor
- Jan 14, 2005
- 61
We took over a customer, military reserve unit, who had a CP installed on the PBX but never used it properly.
No passwords, etc. and over 600 messages were in the Gen Del MBox.
I know from reading here that there is confusion about a CP 150 on a Option 11.
We defaulted the CP and I am going back to the site to install it.
All of the programming is intact in the Option 11, ACD Group and the DN is 5666.
They have (3) Ground Start Trunks, (After I convert them to G/S .. sheeeesh!)
What should I look forward to, in terms of having to program the CP to work?
"Thank you for calling, if you know your party's extension, dial it now, press X for Company Directory, For Department A, press "Y" For Department B, Press "Z", etc."
In the original config, they used it to take calls that weren't answered and messages (apparently) went to the General Delivery.
They are going to want to program an Auto Attendant.
Before we defaulted it, I was able to get to the Browser Interface and access via DB9.
Is the programming similar to Norstar, via Browser, and if not, what things are different when used on the Option 11?
No, the F98X codes don't apply here. It's a PBX.
Sorry, don't know the Release but it was installed last October - New.
Thanks!
Rick Williams "Doctor Dialtone"
No passwords, etc. and over 600 messages were in the Gen Del MBox.
I know from reading here that there is confusion about a CP 150 on a Option 11.
We defaulted the CP and I am going back to the site to install it.
All of the programming is intact in the Option 11, ACD Group and the DN is 5666.
They have (3) Ground Start Trunks, (After I convert them to G/S .. sheeeesh!)
What should I look forward to, in terms of having to program the CP to work?
"Thank you for calling, if you know your party's extension, dial it now, press X for Company Directory, For Department A, press "Y" For Department B, Press "Z", etc."
In the original config, they used it to take calls that weren't answered and messages (apparently) went to the General Delivery.
They are going to want to program an Auto Attendant.
Before we defaulted it, I was able to get to the Browser Interface and access via DB9.
Is the programming similar to Norstar, via Browser, and if not, what things are different when used on the Option 11?
No, the F98X codes don't apply here. It's a PBX.
Sorry, don't know the Release but it was installed last October - New.
Thanks!
Rick Williams "Doctor Dialtone"