could someone please take a look at this site...

[Biankita]

and tell me what is going on?

http://www.bouncecellular.com

I am not a professional and actually the owner of this business. I created it in dreamweaver. I have no clue how to fix this. I previously posted a question in regards to this and someone mentioned it might be the box model problem. I'd appreciate any help before too many of my customers see this :0)

 

[johnwm]

1. Post the correct link - I'm getting a <Can't find server>

2. Did you check out the box model link that you were given?

3. Read faq222-2244 (especially the bit on basic research)

___________________________________________________________
If you want the best response to a question, please check out FAQ222-2244 first.
'If we're supposed to work in Hex, why have we only got A fingers?'
Drive a Steam Roller
Steam Engine Prints

 

[vacunita]

I'll continue here to avoid confusion. And in the future please keep it to one thread as it is still the same issue.

Your link does not seem to be working for me either.
However, from the code you posted in the other thread, I see you are using layers/divs and CSS. This is actually the correct way of doing it. I also see you are using absolute positioning, which should only be used when absolutely necessary.

It seems to me that it is supposed to be a menu. However without the rest of the code, or at least the functioning page to see the problem, i can't really provide any answers.




----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.

 

[Biankita]

Hi, thanks for trying to look at it. There was actually a server problem and it seems to work now. If you would check it out again I'd appreciate it.
I did actually take quite some time to learn the basics by myself but since I also run a business, time is limited.
So any feedback is greatly appreciated.

 

[johnwm]

Your server is still not responding - if this is supposed to be a professional site then I suggest you change your hosting company

___________________________________________________________
If you want the best response to a question, please check out FAQ222-2244 first.
'If we're supposed to work in Hex, why have we only got A fingers?'
Drive a Steam Roller
Steam Engine Prints

 

[Biankita]

You know, I have another site with them for years already and never had a single problem. They are working on it though. Hopefully it will be resolved soon.

 

[CTekMedia]

The site is up - what is the specific issue you want looked at?

Cheers,

Bluetone

 

[Biankita]

Thanks for the response. I already figured out the previous issue. I only checked it in Explorer and Safari, looked fine in both. I am ot a professional so my standards might not be where you guys are. While you are looking at it, is there a way to move the whole page more to center rather than align it on the left?

Thanks so much,

Bianca