Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

corrupted "c:\winNT\system32\Config\System" file....

Status
Not open for further replies.

wlandymore

Technical User
Dec 26, 2003
28
US
this happened after installing a Logitech driver and the restore features haven't done anything to help me out. It seems to be limited to something the computer loads on a normal startup because it will hang or have problems after about 5 min. but there will be no problems at all in 'safe mode'.
I would like to know if there is a way to fix the c:\winnt\system32\config\system file short of a reinstall.
Also, is the information in the system file very unique or a generic type of file that can be obtained from another system that is working properly?
I'm thinking it's probably unique. Anyway, I do have another install on the same partition that is working fine because it's using a different system file in that path. I could copy over the vital information to the WinNT2 folder and then customize the new installation, but I would rather see if there is a way to fix the old one without throwing it away.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top