Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Corporate Directory dialing

Status
Not open for further replies.
klamb

klamb

IS-IT--Management
Mar 30, 2001
55
GB
When we are trying to dial from Corporate Directory we are getting a message saying there are no lines available. If we dial without a line selected it goes directly onto the loudspeaker (obviously).

The question is, how do we configure Corporate Directory (or the PBX) to dial the number using the current line so that we can lift the handset, find the entry and dial?

Many thanks
 
Status
Not open for further replies.

Similar threads

Emara
  • Locked
  • Question
when dialing the access code and th
Replies
1
Views
462
Firebird Scrambler
Firebird Scrambler
John Tel
  • Locked
  • Question
CS1K Signaling Server partition full /dev/hda10 (Not the normal /var issue). Directory not working.
Replies
4
Views
880
John Tel
John Tel
Casey Jordan
  • Locked
  • Question
Nortel Meridian Opt 61c and 10 Digit Local Dialing...
Replies
1
Views
346
Firebird Scrambler
Firebird Scrambler
bad69cat
  • Locked
  • Question
How to enable 10 digit dialing on Opt 81?
Replies
3
Views
320
bad69cat
bad69cat
CentralJIM
  • Locked
  • Question
7 digit to 10 digit dialing using NCOS?
Replies
17
Views
651
CentralJIM
CentralJIM

Part and Inventory Search

Sponsor

Back
Top