Just thought people might want to know this but corel linux has a autodetect feature that sets up most hardware really well,<br>
<br>
just load into console from the lilo menu(boot screen) give the root password then type "detect probe" this probes all hardware in the machine and sets the modules to load on reboot!<br>
If you have a serial mouse not ps2 and you find you can not use the mouse in X windows (KDE) then do this and reboot and hey presto your mousde is there again. I only found this out after many hours of messin around manualy configuring the X windows config file and that for ages. now I know what to do and it works every time! <p>Simon Jones<br><a href=mailto:sijones_uk@yahoo.com>sijones_uk@yahoo.com</a><br><a href= Allandale Youth Works</a><br><b>God</b> am good!!! and good lookin
<br>
just load into console from the lilo menu(boot screen) give the root password then type "detect probe" this probes all hardware in the machine and sets the modules to load on reboot!<br>
If you have a serial mouse not ps2 and you find you can not use the mouse in X windows (KDE) then do this and reboot and hey presto your mousde is there again. I only found this out after many hours of messin around manualy configuring the X windows config file and that for ages. now I know what to do and it works every time! <p>Simon Jones<br><a href=mailto:sijones_uk@yahoo.com>sijones_uk@yahoo.com</a><br><a href= Allandale Youth Works</a><br><b>God</b> am good!!! and good lookin