Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Corel Disc 2 Templates
- Thread starter egglett
- Start date
I've never used any of the templates before but I have an idea what might be causing the problem.
Maybe the template contents are on a separate layer which is set to not print.
If you are not familiar with using layers then go to Windows >Dockers >Object Manager and check if any layers are set not to print (a little printer icon will be greyed out). The Grid, Guidelines and Desktop layers shouldn't be set to print anyway so ignore those.
You didn't state the version, but that is how to find the Objects Manager in Ver. 9.
That is the only solution I can think of at the moment. If that doesn't help just post back. Joe Bananas
An independent guide to Perth, Scotland
Maybe the template contents are on a separate layer which is set to not print.
If you are not familiar with using layers then go to Windows >Dockers >Object Manager and check if any layers are set not to print (a little printer icon will be greyed out). The Grid, Guidelines and Desktop layers shouldn't be set to print anyway so ignore those.
You didn't state the version, but that is how to find the Objects Manager in Ver. 9.
That is the only solution I can think of at the moment. If that doesn't help just post back. Joe Bananas
An independent guide to Perth, Scotland
- Status
Similar threads
- Locked
- Question
- Locked
- Question