Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Convert incoming DID to another DN?

Status
Not open for further replies.

vwtang

IS-IT--Management
Sep 15, 2005
30
US
Hi,

Is it possible to convert an incoming DID number to another DN? If yes, what are the step-by-step instructions?
Thanks a lot!
 
In LD 49 create a IDC table # X

The system prompts you to input the incomming number and asks you for the number it should be converted to.

In LD 16 chg you rout YY.

At the prompt IDC enter YES, the next two prompts ask you for the IDC number and the night IDC number. Enter the above crated IDC numbetr X.

Thats it.
 
LD 49
Req chg
type IDC
Cust 0
DCNO (your Digit conversion tree number)

IDGT xxxx ( XXXX is your DID, example 1234)
1234 bbbb ( bbbb is your new DN, example 4343)

then all external call at 1234 ring in 4343 .



Wolfi
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top