Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Console problem with 'new' type 1924C

Status
Not open for further replies.

Skyfall

Technical User
Joined
Jan 18, 2006
Messages
129
Location
CA
Hi guys,

I just bought a 1924C from ebay, I have problem with console connection. I know a lot people ahve already asked the same question, but I have totally different issue.

The differences are: This 1924 is new type using RJ45 console port, I have the correct CISCO console cable, I did see couple times CLI interface then came up with modem string.

Yes! The first couple times I could connect to it and I can see the menu but I didn't change anything just keep the connection. After a couple hours the CLI looked like freezed, and I restart 1924, and then nothing shows up except 'ATQ0Z0' prompt. I could not even see the starting process within the HyperTermial but 1924 comes up and works fine. How can I get into the CLI? I appreciate you guys help and I'm waiting here.


Thanks guys, I'm learning......
 
Sorry, I know what is wrong here. My PC's COM1 is broken.
As I changed console connection to COM2, everything is all right now.

Thanks guys, I'm learning......
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top