I have a customer with a G3Si with CM 2.2. I recently created a hunt group with a coverage path and a night destination. I modified the dialplan to change attd to an extension and made 88 as the addt. The purpose is to have a hunt-ns button on the console to re-direct calles to another phone when needed - working fine.
Now, when someone internal dials 0, the display on the console will show the name of the hunt group, and not the calling station's name and extension; except for the hotel rooms (hospitality in use on this system). I was able to get this by changing the room to room caller id in sys-feat. I would have to assume something was "broken" when I modified the dialplan, but can't figure it out. Any ideas?
Thanks
Now, when someone internal dials 0, the display on the console will show the name of the hunt group, and not the calling station's name and extension; except for the hotel rooms (hospitality in use on this system). I was able to get this by changing the room to room caller id in sys-feat. I would have to assume something was "broken" when I modified the dialplan, but can't figure it out. Any ideas?
Thanks