Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connection to Hicom 340 via Telnet

Status
Not open for further replies.

RonnieZ

Technical User
Aug 6, 2003
29
NL
Hello,

can I connect to a Siemens Hycom 340 via a router (telnet) using communicationsoftware like Reflection X ?

It looks like I've connected the Pabx, but I don't get any response. Is there a keysequence to enter after I have connected the port.

Thanks.


Ron.
 
Don't know for sure what the Hicom 340 you reference is, but when connecting to the Hicom 300s using Procomm, it sometimes takes a double hit on the enter key to get the login prompt.

Hope that helps.
 
We found a command Ctrl-T and that works in our case.

Thanks for the replys.

Ron
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top