I am trying to setup a sip trunk between my IPO 406 4.1.12 to my exchange 2007 UM. I found this thread that had a link to file but it needs a login. Can any one help me get the file or has has anyone set this up?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting IPO to Exchange 2007 UM
- Thread starter coolbrad
- Start date
- Thread starter
- #3
Hello,
on this very moment we are trying UM2007 on a 2008 server. So far is seems to work. I can make a call to the UM system and use the mailboxes.
I cannot call from the UM system to the IPO. Is this the known problem (see ) or should it work
on this very moment we are trying UM2007 on a 2008 server. So far is seems to work. I can make a call to the UM system and use the mailboxes.
I cannot call from the UM system to the IPO. Is this the known problem (see ) or should it work
- Status
