Connecting CS1000M Dual PRI card to MSDL card via cable 1

[zigmo36]

Good afternoon, everybody! Hope everybody's well.

What cable part number do I need to connect the J6 DCH female port on a Dual PRI card, part #NT5D12AA, to female ports P2 and P3 on an MSDL card, part #NT6D80AA.

All websites keep showing that cable #NTCK80AA has a D9 connector on one end, but the Dual PRI card end has a female 26-pin port.

Can somebody help? Any consideration is highly appreciated.

zigmo36

 

[bhassell2000]

sounds like the right cable to me, its got one end for the DDP card and two ends for the MSDL ports

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[EddieDuece]

How about NT5D16BAE5-05

 

[KCFLHRC]

NTCK80 is what you need

 

[KCFLHRC]

The AA is just the length of the cable

 

[zigmo36]

We finally got the correct cable, after we were sent the wrong cable twice! What a fiasco! Now we're trying to get the Shoretel talking to the Nortel via T-1, without QSIG. Yet another cluster-whatchamacallit!

 

[jamie2]

You'll like the Shoretel if you do not do a lot of specialized routing. Its a good system, but no where as flexible as Nortel.