Connecting an Option11 to a BCM50 with SIP Trunks

[reisve]

Hi

I need to connect an Option11 with a BCM50 using SIP Trunking. Calls to PSTN from BCM50 will go trough the M1.

I hve the proper licences installed, I can configure both M1 and BCM50 at phone and PSTN trunks but I have no clue how to configure both systems for IP trunking. The M1 have a Signaling Server.

Can anyone help me with this please

Virginio Reis

 

[Triton101]

M1 is more involved as you would have to create a SIP domain on NRS and add the BCM to the NRS.

add Virtual Loop (if not there)
create Virtual DCH
add SIP Trunks
Create CDP entries with RLI and RLB


lots of steps.... then setup NRS....

this document on chapter 11 starts you off for the BCM side.

http://support.avaya.com/css/P8/documents/100122442

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

 

[reisve]

Thank You
Good Info, but not much information regarding the BCM50

Virginio Reis

 

[Firebird Scrambler]

Have you seen this guide?.

http://www.ghtrout.com/files/CS1K_BCM_Interoperability_V4_0.zip

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[reisve]

No.

Thanks I was looking for that site too.

Virginio Reis

 

[reisve]

Do you have a link to download the Sig Server image?

Virginio REis