alarmcallpending
MIS
Can you connect a Merlin to a definity switch via a T1 and use the definity trunks for inbound and outbound access?
thanks
thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
connecting a merlin PBX to a Definity question
- Thread starter alarmcallpending
- Start date
- Status
mikeydidit
IS-IT--Management
thread690-825466
This may be of some help to you. I found this after doing a search in this forum. If this is not what you need, try doing a search on merlin legend and their are several other post that may be of some help.
Happy Holidays to all.
Mike Jones
LSUHSC
This may be of some help to you. I found this after doing a search in this forum. If this is not what you need, try doing a search on merlin legend and their are several other post that may be of some help.
Happy Holidays to all.
Mike Jones
LSUHSC
- Status
Similar threads
- Locked
- Question
- Locked
- Question