Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connect printer port via IP
- Thread starter DazzaC
- Start date
- Thread starter
- #3
When you add a new printer add it as a LOCAL printer. On the next scree in the wizard at the bottom there is a "Create a New Port" select that. Then scroll down to "Standard TCP/IP Port"
Click next and enter the IP Address. There you go. The rest of the configuration is what you are used to.
Now if you are using a DOS application is requires LPT1 then you need to do the above on a print server or something to that effect. Then you can do that cornboy88 stated above.
good luck
-Matt
Click next and enter the IP Address. There you go. The rest of the configuration is what you are used to.
Now if you are using a DOS application is requires LPT1 then you need to do the above on a print server or something to that effect. Then you can do that cornboy88 stated above.
good luck
-Matt
- Status
