I use Foxprow2.5b on a 1.4Pentium PC with a 15" KDS Radius Thin-line Monitor. If I run Foxpro or my executable programs AFTER having accessed the Internet (connected to, or not, at that moment), the monitor freezes, the keyboard is non-responsive, and the PC will not shut down unless I disconnect the power at the the source (my NewPoint Power Director).
When the monitor freezes. The screen goes black with a few mixed colors across the top.
I have the monitor set at High Colors (16bit) at 800x600. I have tried a setting of 256 Colors without success.
Presently, If I intend to use Foxprow, I must reboot the PC if I have previously used the Internet browser. This does not happen with any other programs (Word, etc.)
Any suggestions?
When the monitor freezes. The screen goes black with a few mixed colors across the top.
I have the monitor set at High Colors (16bit) at 800x600. I have tried a setting of 256 Colors without success.
Presently, If I intend to use Foxprow, I must reboot the PC if I have previously used the Internet browser. This does not happen with any other programs (Word, etc.)
Any suggestions?