Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuring FXO/FXS using MGCP

Status
Not open for further replies.
phonedudeSr

phonedudeSr

IS-IT--Management
Joined
Oct 5, 2011
Messages
265
Location
US
Does anyone have the process of configuring FXO/FXS using MGCP on CUCM 8.x Router 29XX?
 
Sort by date Sort by votes
Once you have the 29XX router setup as MGCP and registered, you can just click on the link under the Gateway and add the info for the FXS or FXO there.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Russell35674
  • Locked
  • Question Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
936
whykap
whykap
keyset6
  • Locked
  • Question Question
No transmit from new laptop microphone using Jabber
Replies
7
Views
2K
keyset6
keyset6
dogg1
  • Locked
  • Question Question
Cisco Analog Gatway FXS Port to Valcom Paging
Replies
1
Views
635
gnrslash4life
gnrslash4life
jgbmt
  • Locked
  • Question Question
Migrating PRI circuits from Nortel Option 81 to Cisco ISR 2921 MGCP Gateway
Replies
0
Views
286
jgbmt
jgbmt
JaeP2R
  • Locked
  • Question Question
CUCM Configuring for Multiple Lines
Replies
1
Views
769
whykap
whykap

Part and Inventory Search

Sponsor

Back
Top