Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
configuring a vlan on a cisco 2950 switch
- Thread starter batman627
- Start date
eurobadger
Technical User
Hi
Start with :
conf t
int vlan 1
ip add aaa.bbb.ccc.ddd mmm.mmm.mmm.mmm
ctrl-z
EB
Start with :
conf t
int vlan 1
ip add aaa.bbb.ccc.ddd mmm.mmm.mmm.mmm
ctrl-z
EB
Hi,
Conf t
int vlan 1 !!!
This will only assign a mangement IP address to VLAN1. If you want to create multiple vlans, use the VLAN DATABASE commands.
If you are only running a single VLAN you will not have to make any changes to the ethernet interface on the router.
Cheers
Mark
Conf t
int vlan 1 !!!
This will only assign a mangement IP address to VLAN1. If you want to create multiple vlans, use the VLAN DATABASE commands.
If you are only running a single VLAN you will not have to make any changes to the ethernet interface on the router.
Cheers
Mark
- Status
Similar threads
- Locked
- Question