Configure a single phone to insert digits on dial

[rorton]

We have a CS1000 r5, and wish to have 1 or 2 single phones where we can insert digits to the number dialled, but not at a global level.

Is this possible at an individial phone level?

thanks

 

[bignose21]

use Pre translations

 

[bigindian65]

you could set them up HOT D

Mato' Was'aka

 

[GHTROUT]

The key is "insert the digits before or after"

You can insert digits before really easy, as posted above.

Inserting digits on the end of a call is almost impossible - sometimes an analog feature phone with memory buttons does the trick.

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[DocVic]

If that doesn't work for you, try Mike Sandman @

http://www.sandman.com/autodial.html

and check out the super tiny dialer. I've used many of them for years. Saves me time and they never break. They do grow feet and walk away sometimes, but...

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!

 

[rorton]

Thanks for the replies.

It is before (but after the 9)

So end user dials 9, then number, and I need to insert digits before the number but after the 9

How does the pre translation work please?

 

[GHTROUT]

Do any other people dial these particular numbers, that would *not* want these digits inserted?

I ask, because you can easily set up any phone number to always be outpusled a certain way using BARS.

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[gwebster]

Pretranslation is fully described in the Features & Services NTP.

 

[bignose21]

for pre translation if you wanted to insert 141 (UK number withheld) you would build your SCL like this

0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9141

Pre translations are explained in the software feature guide