Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configure a Cisco 1721 Router T1 P2P
- Thread starter JDS339
- Start date
Honestly it's about the simplest config you can do with a Cisco router. Mine are running voice so there are a bunch of VLAN statements that you don't need, or I'd copy them here.
If you have a TAC account you can ask them to send you sample configs, probably the easiest way.
One thing to check is if your provider is providing clocking for the circuit, or if you need to set one of your 1721s to do the clocking. If so the second one gets its clocking from the line.
If you have a TAC account you can ask them to send you sample configs, probably the easiest way.
One thing to check is if your provider is providing clocking for the circuit, or if you need to set one of your 1721s to do the clocking. If so the second one gets its clocking from the line.
- Status
Similar threads
- Locked
- Question