Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configure 2 1601R's with T1 Wics

Status
Not open for further replies.
codecharmer

codecharmer

Programmer
Oct 10, 2003
1
US
Hello,

Does anyone have a sample config for connecting two 1601R's with Wic-1DSU-T1 cards in each.

Also, I have a T1 circuit, but can I test them at the same location with a T1 cross over cable?

Your help is greatly appreciated! It took me three days of pulling my hair out to get tftp to upgrade the flash. It turns out 90% of my trouble was downloading 1601-1604 bin's when apparently these are 1601R-1604R's.

Thanks.
 
Status
Not open for further replies.

Similar threads

CPM86
  • Locked
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
534
CPM86
CPM86
WinstonCH
  • Locked
  • Helpful tip
What is wrong with the diagram, there are people who will help to fix it? How do i do the configurat 1
Replies
1
Views
876
BIS
BIS
inlsp05
  • Locked
  • Question
2811 ios start with cf
Replies
0
Views
336
inlsp05
inlsp05
inlsp05
  • Locked
  • Question
2811&2960 48 volts wiring diagram
Replies
1
Views
605
BOKA
BOKA
khashyar2021
  • Locked
  • Question
Problem with cisco switch after upgrading
Replies
1
Views
447
Geraldine Souza
Geraldine Souza

Part and Inventory Search

Sponsor

Back
Top