Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuration of gateway in cisco call manager

Status
Not open for further replies.
mgcp

mgcp

Technical User
Joined
Sep 18, 2002
Messages
11
Location
US
hai,



Iam having cisco 3660 voice gateway and cisco call manager 3.1(3a).How to register the gateway in cisco call manager.

whether i should h.323 interaction between gateway and call manager or to use MGCP.




please clear me

thank u
 
Sort by date Sort by votes
MGCP offers call survivability, where the call stays up even if the CM goes away, and it is easier to program from CM.
 
Upvote 0 Downvote
You need to configure your gateway as a H323 device since you're using an IOS base gateway.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

wolf8963
  • Locked
  • Question Question
Grandstream HT841 with call manager
Replies
3
Views
1K
wolf8963
wolf8963
mikedphones
  • Locked
  • Question Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
812
mikedphones
mikedphones
CMUK
  • Locked
  • Question Question
Cisco UCM twinning?
Replies
4
Views
617
CMUK
CMUK
Gnjiro
  • Locked
  • Question Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
1K
thepfy
thepfy
B
  • Locked
  • Question Question
Cisco IP Phone 7841 8851 unable to forward to external number
Replies
2
Views
628
keyset6
keyset6

Part and Inventory Search

Sponsor

Back
Top