I am using A Cisco 1760 with a ADSL WAN interface card. I have contacted Cisco and they seem to think I have a ethernet card not a ADSL card, Applied the same items to the ADSL card however with the exception of VPI/VCI numbers.Does anyone have a config that is working with verizon?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Config ADSL WIC to work with Verizon ADSL
- Thread starter DamarDore
- Start date
Below is the config we use to use Verizon DSL with and ADSL wic card. I also have a 1700 series router.
interface ATM0
no ip address
ip nat outside
no atm ilmi-keepalive
pvc 0/16 ilmi
!
pvc 0/35
encapsulation aal5snap
!
bundle-enable
dsl operating-mode auto
bridge-group 1
bridge-group 1 spanning-disabled
hold-queue 224 in
!
interface ATM0
no ip address
ip nat outside
no atm ilmi-keepalive
pvc 0/16 ilmi
!
pvc 0/35
encapsulation aal5snap
!
bundle-enable
dsl operating-mode auto
bridge-group 1
bridge-group 1 spanning-disabled
hold-queue 224 in
!
- Status
Similar threads
- Locked
- Question