I have an old Compaq Armada 1500c C336/S/4000/D/0/1 running Win98. It was booting fine.
Now all I get is the compaq splash screen then the cursor at the right top of screen to enter bios(if you want to)then 60 secs of black screen the error message "Non-System disk or disk error".
I can get into the Setup (System Features)and reset the CMOS to factory default.
Boot Management has Enable QuickBoot "ON"
MultiBoot "ON" Boot order
Optical disk bay
MulitBay
Hard drive bay
Setup (Storage)
IDE controller
Resources:
Interrupt request number 14
Input/Output range 0x01f0 - 0x1f7
Input/Output range 0x03F6 - 0x03F6
Input/Output range 0x1020 - 0x102F
HDD capacity (MB): 4108
HD type: 65
No cylinders: 8906
No heads: 15
Sectors per track: 63
When I try to boot the original restore disk the CD drive spins for 10secs and stops. Tried to boot Win98 floppy no response.
I took all drives out HDD CD Floppy booted and and put it all back together.
Still the same promblem and same error message.
Thanking anyone in advance that could shed some light on my problem.
Now all I get is the compaq splash screen then the cursor at the right top of screen to enter bios(if you want to)then 60 secs of black screen the error message "Non-System disk or disk error".
I can get into the Setup (System Features)and reset the CMOS to factory default.
Boot Management has Enable QuickBoot "ON"
MultiBoot "ON" Boot order
Optical disk bay
MulitBay
Hard drive bay
Setup (Storage)
IDE controller
Resources:
Interrupt request number 14
Input/Output range 0x01f0 - 0x1f7
Input/Output range 0x03F6 - 0x03F6
Input/Output range 0x1020 - 0x102F
HDD capacity (MB): 4108
HD type: 65
No cylinders: 8906
No heads: 15
Sectors per track: 63
When I try to boot the original restore disk the CD drive spins for 10secs and stops. Tried to boot Win98 floppy no response.
I took all drives out HDD CD Floppy booted and and put it all back together.
Still the same promblem and same error message.
Thanking anyone in advance that could shed some light on my problem.