Communicator Mobile

[newglide]

I have 6.3 CM and CES. I am testing the Avaya Mobile Communicator. I am currently running the One X mobile.
When I configure Communicator to make calls using my cell the calls do not reach my cell.
When I do a list trace it appears the CM is not inserting the 9 before it tries to dial out to my cell.

08:33:30 TRACE STARTED 02/16/2016 CM Release String cold-03.0.124.0-21591
08:33:35 active station 1393 cid 0x16d7
08:33:35 dial 609 route:HNPA|ARS
08:33:35 term trunk-group 3 cid 0x16d8
08:33:35 dial 6090815 route:HNPA|ARS
08:33:35 route-pattern 2 preference 1 location 1/ALL cid 0x16d8
08:33:35 seize trunk-group 3 member 23 cid 0x16d8
08:33:35 Setup digits 6090815
08:33:35 Calling Number & Name 1393 NO-CPName
08:33:35 Proceed trunk-group 3 member 23 cid 0x16d8
08:34:54 G711MU ssff ps:20
rgn:1 [10.9.8.54]:2186
rgn:1 [10.9.6.161]:2068
08:34:54 active station 1393 cid 0x16e4
08:34:54 dial 1010
08:34:54 ring station 1010 cid 0x16e4
08:34:54 G711MU ssff ps:20
rgn:1 [10.9.8.8]:2154
rgn:1 [10.9.6.16]:2050
08:34:54 idle station 1393 cid 0x16e4
08:34:57 denial event 1316: No unrstrictd term point D1=0x9eb9 D2=0x16d7
08:35:27 idle cid 0x16d7

 

[kyle555]

I don't think the 9 is so much important - I think it's all based in your off pbx station mapping to us ARS for that cell #.

I'd be more concerned about "no unrestricted term point". I'd look at stuff like privacy, COR stuff, auto-exclusion, maybe still like that